CORRELATION BETWEEN TRANSVERSE CEPHALOMETRIC PARAMETERS AND THE SEVERITY OF SKELETAL MALOCCLUSIONS.

Malocclusion prevalence varies globally, ranging from 34.9% to 93.6% for Class I, 4.4% to 44.7% for Class II, and 1.4% to 19.4% for Class III occlusions. This study aims to assess transverse cephalometric measurements related to maxillary and mandibular dimensions, intermolar and intercanine distances, and other relevant factors. The descriptive cross-sectional research included 100 individuals with malocclusion grades 1, 2, and 3. The study involved 100 participants across three age groups (15-21, 22-28, 29-35), with the majority in the 22-28 range. Gender distribution showed a significant imbalance (77% female, 23% male). Cephalometric measurements for three malocclusion types revealed distinct patterns. Notably, inter-molar width exhibited a strong positive correlation with malocclusion severity (Malocclusion 1: r=0.504 to 0.561, Malocclusion 2: r=0.560 to 0.625, Malocclusion 3: r=0.625 to 0.559), while maxillary-mandibular transverse discrepancy had a negative correlation (Malocclusion 1: r=-0.496, Malocclusion 2: r=-0.483, Malocclusion 3: r=-0.483). Age-diverse sample, gender imbalance noted. Cephalometric correlations reveal inter-molar width association with malocclusion severity, emphasizing clinical implications.

Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics.

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9-73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.

Radiological, histological and clinical side effects of incisor trimming in rabbits.

INTRODUCTION: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

INTRODUCTION: La malocclusion des incisives chez le lapin (Oryctolagus cuniculus) est un problème clinique courant en médecine générale. Étant donné que le taux de croissance est d'environ 2 mm par semaine, un manque d'usure entraîne rapidement des difficultés d'alimentation et des lésions des tissus mous. Par conséquent, les incisives pathologiquement trop longues doivent être raccourcies toutes les trois à six semaines. L'objectif de cette étude était d'évaluer les effets négatifs potentiels sur les tissus dentaires et parodontaux associés aux trois méthodes de taille les plus couramment utilisées: le coupeongles, le disque de coupe diamanté et la fraise diamantée. L'incisive mandibulaire gauche de 28 lapins néo-zélandais en bonne santé a été soumise à quatre tailles avec l'une des trois méthodes de coupe. Après la période d'engraissement, les mandibules ont été prélevées et les deux incisives mandibulaires ont été examinées sur des radiographies dentaires, des examens micro-tomodensitométriques et des coupes histologiques. Les modifications des tissus dentaires et parodontaux ont été évaluées. Cette étude a permis de mieux cerner les effets indésirables potentiels à court terme des trois méthodes de coupe. Au niveau clinique, le coupe-ongles a entraîné la formation d'une surface occlusale irrégulière avec des bords tranchants. Les deux autres méthodes de taille permettent d'obtenir une surface lisse, mais le disque est moins précis. L'évaluation histologique a révélé que les modifications primaires, y compris les fractures coronaires, l'élargissement et l'inflammation du ligament parodontal, l'ostéodentine réparatrice, la paracémentose et l'accumulation de biofilm, ont été trouvées dans le groupe coupe-ongles.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

Prevalence and patterns of third molar impaction among Ethiopians in Addis Ababa: a retrospective pilot study.

Tooth impaction is a condition in which a tooth does not reach its normal position and is often observed in the third mandibular molar due to inadequate space. This study aimed to investigate the prevalence and configuration of the impacted third molars with an emphasis on angular orientations in a sample of the Ethiopian population. This cross-sectional study included a retrospective analysis of 291 patient records and orthopantomography data from the archives of a private dental clinic in Addis Ababa, during the study period from December 2020 to November 2022. Demographic details and data on the position and level of the impacted third molars were evaluated using the Winter classification. Data were analyzed for frequency distribution. The prevalence of impacted third molars was 22% (n = 64), with a greater incidence on the right side (60.9%) and a higher frequency in the mandible (67.2%). Vertical angulation (32.8%), followed by mesioangular angulation (31.2%), was the most common impaction pattern. The results highlight the need for improved treatment protocols for third molar impaction, emphasizing the prevalence in the mandible and the importance of addressing vertical impaction. Regular dental check-ups are essential for assessing third molar impaction and planning appropriate management. These data can inform policymaking and treatment considerations for impacted third molars in the Ethiopian population.

Comparison of condylar position after free fibular flap mandibular reconstruction using computer-assisted and traditional techniques.

OBJECTIVES: To compare the changes in condylar position after mandibular reconstruction with free fibular flap(FFF) and the differences between computer-assisted techniques and traditional methods on CT images. METHODS: Thirty-four patients who underwent mandibular reconstruction with free fibular flap were selected according to the inclusion and exclusion criteria. In the 3D group, virtual surgical planning (VSP) with osteotomy cutting plate and placement guiding plate were used, while the traditional group underwent freehand reconstruction. The CT data of 68 temporomandibular joints (TMJs) were recorded before and immediately after surgery. The condylar position was evaluated by measuring the anterior space (AS), posterior space (PS) and superior space (SS), and the ln (PS/AS) was calculated according to the method proposed by Pullinger and Hollender. RESULTS: In the patients included in the 3D group, the condyle on the ipsilateral side moved slightly backward; however, in the patients in the traditional group, the ipsilateral side moved considerably anteroinferior. No obvious changes on the contralateral side were noted. In the 3D group, 33% of ipsilateral condyles were in the posterior position postoperatively when compared with the preoperative position (13%). In the traditional group, the number of ipsilateral condyles in the anterior position increased from 4 to 10, accounting for 53% postoperatively. Contrary to the traditional group, the 3D group presented less condylar displacement on the ipsilateral side postoperatively. CONCLUSIONS: This study showed a decreased percentage of change in condylar position postoperatively when VSP was used. Virtual surgical planning improved the accuracy of FFF mandibular reconstruction and made the condylar position more stable.

Comparative biomechanics of all-on-4 and vertical implant placement in asymmetrical mandibular: a finite element study.

BACKGROUND: Clinical scenarios frequently present challenges when patients exhibit asymmetrical mandibular atrophy. The dilemma arises: should we adhere to the conventional All-on-4 technique, or should we contemplate placing vertically oriented implants on the side with sufficient bone mass? This study aims to employ three-dimensional finite element analysis to simulate and explore the biomechanical advantages of each approach. METHODS: A finite element model, derived from computed tomography (CT) data, was utilized to simulate the nonhomogeneous features of the mandible. Three configurations-All-on-4, All-on-5-v and All-on-5-o were studied. Vertical and oblique forces of 200 N were applied unilaterally, and vertical force of 100 N was applied anteriorly to simulate different masticatory mechanisms. The maximum von Mises stresses on the implant and framework were recorded, as well as the maximum equivalent strain in the peri-implant bone. RESULTS: The maximum stress values for all designs were located at the neck of the distal implant, and the maximum strains in the bone tissue were located around the distal implant. The All-on-5-o and All-on-5-v models exhibited reduced stresses and strains compared to All-on-4, highlighting the potential benefits of the additional implant. There were no considerable differences in stresses and strains between the All-on-5-o and All-on-5-v groups. CONCLUSIONS: With the presence of adequate bone volume on one side and severe atrophy of the contralateral bone, while the "All-on-4 concept" is a viable approach, vertical implant placement optimizes the transfer of forces between components and tissues.

Prevalence of impacted third molars: a radiographic study among a North African population.

INTRODUCTION: Third molars are the most commonly concerned teeth with the impaction. Impacted third molar (ITM) can be associated to various clinical pathologies Aim: To determine the prevalence of ITM, its pattern and associated affections in Tunisian patients. METHODS: The study reviewed panoramic radiographs of patients consulting the Fattouma Bourguiba University Hospital, Monastir (Tunisia). Orthopantomograms were analyzed to define the prevalence of ITM; its angulation, depth and relation with the anterior border of mandibular ramus. Associated pathologies were also assessed. RESULTS: Seven hundred and thirty patients were included (286 men and 444 women). The age ranged from 19 to 89 years. Half of the patients (50.3%) showed at least one ITM. The total number of ITM was 881 with a statistical difference between arches (respectively 34.3% and 65.7% in the maxilla and in the mandible). The most common number of ITM was two (35.4%). Level C of impaction was observed more frequently in the maxilla and level A in the mandible. The most common angulation was the vertical one for both arches. Seventy six percent of ITM were presented with class II in relation with the anterior border of mandibular ramus. There was no significant difference in the frequency of impaction between gender and sides. The number of ITM associated with pathological conditions was 199 (22.6%). The most frequently observed pathology was the distal caries on the second molars (11.7%) followed by the caries of the third molars (5.2%). CONCLUSION: The prevalence of ITM among Tunisian patients was high.

Immediate implant placement in the anterior mandible: a cone beam computed tomography study.

BACKGROUND: The placement of implants into the alveolar socket right after tooth extraction is called immediate implant placement (IIP). This approach has its particularities depending on which region of the jaws is involved. The anterior mandible region is peculiar due to the presence of mandibular incisors, which have the shortest roots among all permanent teeth. PURPOSE: This study aimed to investigate the factors that could be associated with the risk of either cortical bone wall perforation or invasion of the 2 mm secure distance from the surrounding anatomical structures (defined as unsafe implant placement), with IIP in the maxillary aesthetic zone, in a cone-beam computed tomography (CBCT) virtual study. MATERIALS AND METHODS: CBCT exams from 239 eligible subjects were investigated. Implants were virtually placed in two distinct positions: prosthetically-driven (along the long axis of the existing tooth) and bone-driven position (according to the available bone and with regard to nearby anatomical structures). Correlation between several variables was tested, and binary logistic regression analysis in order to assess of the possible associations between covariates and unsafe placement was performed. RESULTS: Safe placing implants was significantly higher for the bone-driven in comparison to the prosthetically-driven position (22.2% vs. 3.3%, respectively), and the 2-mm secure distance from anatomical structures was not possible to respect in the majority of cases (77.6% vs. 82.9%, respectively). Covariates associated with a higher risk of unsafe placement were tooth region (CI in relation to IL and CA), decrease of labial concavity angle (LCA), decrease of mandible basal bone height (MBBH), and decrease in mandibular bone thickness at the tooth apex level (MBT0). CONCLUSION: The possibility of safely placing immediate implants in the anterior mandible is significantly higher for bone-driven than in prosthetically driven position. Presurgical virtual planning with CBCT is a great tool for minimizing the risk of implant unsafe placement with regards to the anatomical conditions in the mandible.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Relationship between Impacted Mandibular Third Molars and the Mandibular Canal on CBCT Scans.

This study aimed to assess the relationship of impacted mandibular third molars with the mandibular canal on cone beam computed tomography (CBCT) scans. This cross-sectional study was conducted on CBCT scans of 137 patients with 204 impacted mandibular third molars. The relation of age, gender, class of impaction, anatomical position of canal relative to tooth (buccal, lingual, inferior, inter-radicular), tooth angulation (mesioangular, vertical, distoangular, horizontal), relationship of tooth with the mandibular canal (no contact, in contact, relation), relationship of tooth with the mandibular cortex, anatomical site of contact of tooth with the mandibular cortex (buccal, lingual, inferior), and the impression of canal (grooving, no effect) on impacted teeth were evaluated. Data were analyzed using one-way ANOVA, Chi-square test and Fisher's exact test. Class B of impaction (78.9%), inferior position of canal relative to the impacted tooth (53.9%) and mesioangular angulation (53.4%) had the highest frequency, respectively. The relationship of tooth with the mandibular canal was "relation" in most cases (53.4%) followed by no contact (26.9%) and in contact (19.6%). Significant associations were noted between depth of impaction (P < 0.001), tooth angulation (P = 0.024), anatomical position of canal relative to tooth (P < 0.001), relationship of tooth with the mandibular cortex (P = 0.032) and anatomical site of contact of tooth with the mandibular cortex (P = 0.013) with the impacted tooth-mandibular canal relationship. CBCT provides accurate information about the relationship of impacted third molars with the mandibular canal and can decrease the risk of traumatization of inferior alveolar nerve (IAN) during their surgical extraction.

Investigation of the relationship between the mandibular third molar teeth and the inferior alveolar nerve using posteroanterior radiographs: a pilot study.

BACKGROUND: The most severe complication that can occur after mandibular third molar (MM3) surgery is inferior alveolar nerve (IAN) damage. It is crucial to have a comprehensive radiographic evaluation to reduce the possibility of nerve damage. The objective of this study is to assess the diagnostic accuracy of panoramic radiographs (PR) and posteroanterior (PA) radiographs in identifying the association between impacted MM3 roots and IAN. METHODS: This study included individuals who had PR, PA radiographs, and cone beam computed tomography (CBCT) and who had at least one impacted MM3. A total of 141 impacted MM3s were evaluated on CBCT images, and the findings were considered gold standard. The relationship between impacted MM3 roots and IAN was also evaluated on PR and PA radiographies. The data was analyzed using the McNemar and Chi-squared tests. The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and diagnostic accuracy of PR and PA radiographies were determined. RESULTS: Considering CBCT the gold standard, the relationship between MM3 roots and IAN was found to be statistically significant between PR and CBCT (p = 0.00). However, there was no statistically significant relationship between PA radiography and CBCT (0.227). The study revealed that the most prevalent limitation of the PR in assessing the relationship between MM3 roots and IAN was the identification of false-positive relationship. CONCLUSIONS: PA radiography may be a good alternative in developing countries to find out if there is a contact between MM3 roots and IAN because it is easier to get to, cheaper, and uses less radiation.

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis. / ä¸‹é¢Œç¬¬ä¸€ç£¨ç‰™è¿œèˆŒæ ¹çš„å­˜åœ¨ä¸Žç‰™å‘¨çŠ¶æ€çš„ä¸´åºŠç›¸å ³æ€§åˆ†æžï¼šä¸€é¡¹é‡‡ç”¨é”¥å½¢å°„æŸç”µè„‘æ–­å±‚æ‰«æåˆ†æžçš„æ¨ªæ–­é¢ç ”ç©¶.

OBJECTIVES: Distolingual root of the permanent mandibular first molar (PMFM-DLR) has been frequently reported, which may complicate the treatment of periodontitis. This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background. MATERIALS AND METHODS: A total of 836 cone beam computed tomography (CBCT) images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China. Among them, complete periodontal charts were available for 69 Chinese patients with 103 teeth. Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR, bone loss, and periodontal clinical parameters, including clinical attachment loss (CAL), probing pocket depth (PPD), gingival recession (GR), and furcation involvement (FI). RESULTS: The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4% and 26.3%, respectively. Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section, while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section. CONCLUSIONS: The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort. The morphological features of DLR were correlated with the periodontal status of mandibular first molars. This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

Automatic measurement of fetal anterior neck lower jaw angle in nuchal translucency scans.

This study aims at suggesting an end-to-end algorithm based on a U-net-optimized generative adversarial network to predict anterior neck lower jaw angles (ANLJA), which are employed to define fetal head posture (FHP) during nuchal translucency (NT) measurement. We prospectively collected 720 FHP images (half hyperextension and half normal posture) and regarded manual measurement as the gold standard. Seventy percent of the FHP images (half hyperextension and half normal posture) were used to fit models, and the rest to evaluate them in the hyperextension group, normal posture group (NPG), and total group. The root mean square error, explained variation, and mean absolute percentage error (MAPE) were utilized for the validity assessment; the two-sample t test, Mann-Whitney U test, Wilcoxon signed-rank test, Bland-Altman plot, and intraclass correlation coefficient (ICC) for the reliability evaluation. Our suggested algorithm outperformed all the competitors in all groups and indices regarding validity, except for the MAPE, where the Inception-v3 surpassed ours in the NPG. The two-sample t test and Mann-Whitney U test indicated no significant difference between the suggested method and the gold standard in group-level comparison. The Wilcoxon signed-rank test revealed significant differences between our new approach and the gold standard in personal-level comparison. All points in Bland-Altman plots fell between the upper and lower limits of agreement. The inter-ICCs of ultrasonographers, our proposed algorithm, and its opponents were graded good reliability, good or moderate reliability, and moderate or poor reliability, respectively. Our proposed approach surpasses the competition and is as reliable as manual measurement.

Natural canal deviation and dentin thickness of mesial root canals of mandibular first molars assessed by microcomputed tomography.

The aim of this study was to assess the centralization and dentin thickness of mesial root canals of the first mandibular molars by microcomputed tomography (micro-CT). Material and methods: Ninety-nine mandibular molars of Vertucci's type IV canals were scanned by micro-CT. The mesiodistal deviation and centroid were assessed, in both mesiobuccal (MB) and mesiolingual (ML) canals, for the apical 4mm and the full canal length. Results: The dentin thickness was similar for both MB and ML canals. The narrowest thickness was in the distal wall of an MB canal (0.07mm), while the widest was found in the mesial wall of an MB canal (2.46mm). In centroid analysis, both the MB and ML canals exhibited deviations when compared to the root centroid, along the full canal length and the apical 4mm. For the MB canal, the mean deviation was 0.83mm (0.02 mm-2.30 mm) for the full canal and 0.18mm (0.01 mm-1.01 mm) for apical 4mm. Similarly, for the ML canal, the mean deviation measured 0.83 mm (0.05mm-3.99mm) for the full canal and 0.21 mm (0.01mm-1.01mm) for the apical 4 mm. Overall, deviations were observed towards the mesial of the roots, with 69% for MB and 57% for ML canals for the full canal, and 51% for MB canals within the 4 mm. The exception was the ML canal, which exhibited a higher deviation towards distal in the apical 4mm, accounting for 52% of cases. The dentin thickness was consistent between the mesial canals of mandibular molars. However, there is no centrality of mesial canals in their roots, with frequent deviation to mesial.

Introducing a novel intraoral mandibular nerve block technique for loco-regional analgesia in camels (Camelus dromedarius): a cadaveric study using computed tomography.

The aim of this study was to introduce a novel intraoral technique for performing mandibular nerve blocks in dromedary camels (Camelus dromedarius). In this study, 18 adult camel skulls of varying ages and breeds were examined to determine the position of the mandibular foramen. Using a Vernier caliper, three dimensions in millimeters were measured: (1) the distance between the mandibular foramen (MF) and the caudal edge of the third molar tooth at the occlusal surface level, (2) the distance between the MF and the rostral edge border of the mandible's ramus (RER) at the occlusal surface level, and (3) the distance between the MF and the ventral margin border of the mandible (VM). The technique was evaluated using five intact camel cadaver heads (n = 5), and a total of ten mandibular nerve blocks were described. An 18-gauge 80-mm Tuohy needle was inserted into the mouth commissure and advanced caudally while injecting a saline-methylene blue solution. The accuracy of the injection was confirmed through the infiltration of the contrast dye into the target area using computed tomography (CT) and post procedural dissection. Anatomical study of the mandibular nerve site was performed to aid the blind insertion of the needle. The findings contribute to the development of veterinary anesthesia techniques and provide anatomical considerations for clinicians performing oral surgeries in sedated camels. The results demonstrated the successful implementation of the intraoral technique, highlighting its efficacy and reliability in achieving local anesthesia for oral surgeries involving the lower jaw and teeth in sedated camels. Further research studies are needed to evaluate the long-term efficacy and safety of the technique and to compare it with existing approaches.

Computed tomography/magnetic resonance imaging for mandibular boundary invasion of oral squamous cell carcinoma assessment.

BACKGROUND: The range of mandibular invasion by a tumour needs to be determined accurately to minimize unnecessary damage to the mandible. This study aimed to compare tumour boundary lines on computed tomography/magnetic resonance (CT/MR) images with those from pathological findings during the preoperative assessment of mandibular invasion by oral squamous cell carcinoma (OSCC). By comparing the methods, the potential of CT/MR for this application could be further elucidated. METHODS: Eight patients with OSCC were imaged with CT/MR, mandibular specimens were collected, and the material site was measured. Haematoxylin-eosin staining was used for histopathological assessment. The presence and boundaries of bone invasion were evaluated. The CT/MR and histopathological boundaries of bone invasion were delineated and merged to compare and calculate the deviation of CT/MR and histopathological boundaries using the Fréchet distance. RESULTS: The mean Fréchet distance between the CT and pathological tumour boundaries was 2.69 mm (standard error 0.46 mm), with a minimum of 1.18 mm, maximum of 3.64 mm, median of 3.10 mm, and 95% confidence interval of 1.40-3.97 mm. The mean Fréchet distance between the tumour boundaries on the MR and pathological images was 3.07 mm (standard error 0.56 mm), with a minimum of 1.53 mm, maximum of 4.74 mm, median of 2.90 mm, and 95% confidence interval of 1.53-4.61 mm. CONCLUSIONS: CT/MR imaging can provide an effective preoperative assessment of mandibular invasion of OSCC. Pathology images can be positioned on CT/MR scans with the help of computer software to improve the accuracy of the findings. The introduction of the Fréchet distance to compare tumour boundary lines is conducive to computer image diagnosis of tumour invasion of jaw boundaries.

Menopause-Associated Changes in Mandibular Bone Microarchitecture Are Site-Specific.

BACKGROUND: There are conflicting reports on the effects of decreased estrogen levels on mandibular bone microarchitecture. Whether these effects are consistent throughout the mandible is unclear and may have important implications for treatment planning. PURPOSE: The goal of this study was to evaluate trabecular and cortical bone microstructure in the mandibular condyle and the mandibular basal bone and compare these sites between premenopausal and postmenopausal women. STUDY DESIGN, SETTING, SAMPLE: Participants were recruited for a cross-sectional cohort study at Columbia University Irving Medical Center. Each participant had cone-beam computed tomography taken of their mandibular condyles and the basal bone. Exclusion criteria for the population included a) current chemotherapy or immunotherapy; b) history of bisphosphonate or other osteoporosis therapy; and c) currently pregnant, nursing, or on hormonal birth control. INDEPENDENT VARIABLE: The predictor variables are menopausal status (before or after menopause) and mandibular region of interest (condyle/basal bone). MAIN OUTCOME VARIABLE: Parameters of interest included the following indicators of bone quality: trabecular bone volume fraction, trabecular thickness, trabecular number, trabecular separation, cortical bone volume fraction, cortical thickness, and cortical porosity. COVARIATES: Covariates included demographic variables such as age, estrogen levels, and ethnicity. ANALYSES: Quantitative microstructure analyses were conducted on cone-beam computed tomography images, and differences between groups for continuous measures (including age) were assessed with an unpaired t-test, and demographic variables were assessed by χ2. Statistical significance was recorded at P < .05. RESULTS: The premenopausal and postmenopausal groups each had 31 participants, with the following average age: premenopausal = 43.9 ± 6.9 versus postmenopausal = 57.5 ± 7.6 years old; P < .001, and estrogen levels: premenopausal = 91.77 ± 80.13 pg/ml versus postmenopausal = 41.44 ± 61.62 pg/ml; P < .01). Postmenopausal women had significantly greater condylar trabecular separation (0.61 ± 0.18 vs 0.47 ± 0.11 mm; P < .001) and lower trabecular number (1.03 ± 0.18 vs 1.21 ± 0.19 mm-1; P < .001) compared to premenopausal women. There were no significant differences in the basal bone microarchitectural parameters between the menopausal groups. CONCLUSION AND RELEVANCE: Menopause is associated with mandibular condylar trabecular bone loss but has minimal effects on the mandibular basal bone. This may have important ramifications for treatment planning in advanced-age individuals.

Soft-tissue, non-osteogenic distraction of the mandible and lower face in bilateral hemifacial microsomia-technical report.

The aim of this study is to present a sequential strategy of soft-tissue, non-osteogenic distraction with a novel device, followed by microvascular bony reconstruction for severe cases of mandibular hypoplasia. The case of a 21-year-old woman with Goldenhar syndrome is presented, whose mandible remained severely hypoplastic despite previous attempts at distraction and was not suitable for further osteogenic distraction. Soft tissue deficiency and pin track scarring prevented free fibular transfers. A personalized distractor, anchored to the cranium and the mandibular symphysis, was designed to expand the soft tissues while allowing for physiological temporomandibular joint (TMJ) movement without compression forces. Internal distractors were placed along the osteotomies to prevent condylar luxation. After completion of the soft tissue distraction, the native mandible was resected except for the condyles and reconstructed with two free fibula flaps. This report represents the proof of concept of a sequential approach to severe lower face soft-tissue and bone deficiency, which preserves TMJ function and avoids the transfer of poorly matched skin to the face.

Three-dimensional measurements of symmetry for the mandibular ramus.

BACKGROUND: The study examines a sample of patients presenting for viscerocranial computer tomography that does not display any apparent signs of asymmetry, assesses the three-dimensional congruency of the mandibular ramus, and focuses on differences in age and gender. METHODS: This cross-sectional cohort study screened viscerocranial CT data of patients without deformation or developmental anomalies. Segmentations were obtained from the left and right sides and superimposed according to the best-fit alignment. Comparisons were made to evaluate three-dimensional congruency and compared between subgroups according to age and gender. RESULTS: Two hundred and sixty-eight patients were screened, and one hundred patients met the inclusion criteria. There were no statistical differences between the left and right sides of the mandibular ramus. Also, there were no differences between the subgroups. The overall root mean square was 0.75 ± 0.15 mm, and the mean absolute distance from the mean was 0.54 ± 0.10 mm. CONCLUSION: The mean difference was less than one millimetre, far below the two-millimetre distance described in the literature that defines relative symmetry. Our study population displays a high degree of three-dimensional congruency. Our findings help to understand that there is sufficient three-dimensional congruency of the mandibular ramus, thus contributing to facilitating CAD-CAM-based procedures based on symmetry for this specific anatomic structure.